TRAINING INTERNAL AND EXTERNAL CORRORION CONTROL AND MONITORING FOR PIPELINE AND SURFACE FACILITY
Training Kontrol Korosi Internal Dan Eksternal Dan Pemantauan Untuk Fasilitas Saluran Pipa Dan Permukaan
Training Metode Dan Bahan Digunakan Untuk Mengontrol Korosi Dari Larutan Amina Yang Kaya
INTRODUCTION :
This course focuses on corrosion – from either internal or external source – and its potential problem, and the protection methods to stop or control them. Review on corrosion and technique by which it can be identified, monitored and controlled will be given in detail. Active participation is encouraged through case studies and examples especially on the use of painting and coatings, transformer-rectifier of impressed current, magnesium, zinc and alum sacrificial anodes for external protection, and the injection of corrosion inhibitors and biocides for internal corrosion control.
PRE-REQUISITE :
NONE. No previous training in corrosion control is required. However, to gain the most from this course, a basic understanding of physics, chemistry and basic unit operations will be helpful.
TRAINING MATERIAL OUTLINE :
1. Review of oil & gas surface production facility and operations.
2. Review of metallic materials used in surface production facility and pipelines and the corrosion problem usually happen.
3. Case studies and examples of oil & gas material failure caused by corrosion from internal and external source.
4. Uniform, galvanic and localized corrosion failures.
5. Internal corrosion of pipeline, vessel and processing equipment caused by sour component, H2S, CO2, organic acid, brine, and the SRB (sulfate reducing bacteria).
6. External corrosion of underground, underwater and under-seawater pipeline and structure caused by impurities in soil and water environment.
7. External corrosion of topside structure caused by marine atmosphere.
8. Basic electrochemistry of corrosion process, Ohm’s law and the corrosion rate.
9. Corrosion control and prevention with painting & coatings and the cathodic protection.
10. Measurement of corrosion potential and corrosion current.
11. Protection with sacrificial anode and impressed current.
12. Understanding NACE Standard RP-01-69 to stop external corrosion attack.
13. Requirement, design and criteria of cathodic protection.
14. Sacrificial anode specification, installation and construction.
15. Testing, monitoring, and inspection of cathodic protection.
16. Inspection and maintenance of transformer-rectifier and sacrificial anode.
17. Field test, measurement techniques and instrument.
18. Data recording and evaluation of cathodic protection system.
19. Case studies of corrosion control and prevention with cathodic protection.
20. Internal corrosion problem in the pipeline and surface facility.
21. Oil/gas/water fluid properties and the corrosion tendency.
22. Deterioration by H2S, CO2, and acidic corrosive components.
23. Pipeline leakage and rupture by microbial induced corrosion.
24. Corrosion caused by SRB and the pitting mechanism.
25. Corrosion caused by oxygen penetration.
26. Examples and case studies of equipment corrosion damage and pipeline leakage.
27. Understanding NACE Standard RP-0775 for internal corrosion control and monitoring.
28. Practical internal corrosion monitoring methods.
29. Access fittings, corrosion coupon and corrosion probes.
30. Practical internal corrosion control and prevention methods.
31. Internal corrosion control with inhibitors and the selection of suitable corrosion inhibiting chemicals.
32. Dosage and injection methods of corrosion inhibitors.
33. SRB control with biocides and the selection of suitable and low risk biocide formula.
34. Dosage and injection methods of biocides.
35. Oxygen control by de-aeration and chemical injection, and the selection of suitable oxygen scavenger chemicals.
36. Dosage and injection methods of oxygen scavenger.
37. Safety in the use of chemicals for internal corrosion prevention.
38. Review of gas dehydration process and operations.
39. Internal corrosion problem in glycol contactor (dehydration) unit.
40. Method and materials use to control the corrosiveness of rich glycol solution.
41. Review of amine sweetening process and operations.
42. Internal corrosion problem in amine sweetening unit.
43. Method and materials use to control the corrosiveness of rich amine solution.
44. Examples and case studies of internal corrosion control
WHO SHOULD ATTEND THIS TRAINING?:
1. Anyone who needs to recognize corrosion and understand its devastating potential, especially as it relates to his or her area of responsibility, in oil and gas surface production facility and pipelines.
2. Anyone involved in combating and controlling corrosion from internal and external source.
3. Technicians and field operators and engineers of any discipline.
4. Onshore / offshore facility and pipeline cathodic protection inspectors.
5. Onshore / offshore structure painting and coating applicators and inspectors.
6. Amine sweetening, glycol dehydration and gas processing plant operators.
7. Beginners who interested in.
METODE TRAINING INTERNAL AND EXTERNAL CORRORION CONTROL AND MONITORING FOR PIPELINE AND SURFACE FACILITY
1. Presentation
2. Discuss
3. Case Study
4. Evaluation
5. Pre-Test & Post-Test
6. Games
- Training Bulan Januari : 18-19 Januari 2025
- Training Bulan Februari : 22-23 Februari 2025
- Training Bulan Maret : 15-16 Maret 2025
- Training Bulan April : 19-20 April 2025
- Training Bulan Mei : 23-24 Mei 2025
- Training Bulan Juni : 14-15 Juni 2025
- Training Bulan Juli : 12-13 Juli 2025
- Training Bulan Agustus : 23-24 Agustus 2025
- Training Bulan September : 13 – 14 September 2025
- Training Bulan Oktober : 11-12 Oktober 2025
- Training Bulan November : 29-30 November 2025
- Training Bulan Desember : 13-14 Desember 2025
Catatan: Jadwal tersebut dapat disesuaikan dengan kebutuhan calon peserta. Peserta dapat mengajukan tanggal pelaksanaan pelatihan.
LOKASI TRAINING INTERNAL AND EXTERNAL CORRORION CONTROL AND MONITORING FOR PIPELINE AND SURFACE FACILITY
REGULER TRAINING
- Yogyakarta, Hotel Dafam Malioboro (6.000.000 IDR / participant)
- Jakarta, Hotel Amaris Tendean (6.500.000 IDR / participant)
- Bandung, Hotel Golden Flower (6.500.000 IDR / participant)
- Bali, Hotel Ibis Kuta (7.500.000 IDR / participant)
- Lombok, Hotel Jayakarta (7.500.000 IDR / participant)
ONLINE TRAINING VIA ZOOM
INVESTASI TRAINING INTERNAL AND EXTERNAL CORRORION CONTROL AND MONITORING FOR PIPELINE AND SURFACE FACILITY
- Investasi pelatihan selama tiga hari tersebut menyesuaikan dengan jumlah peserta (on call). *Please feel free to contact us.
Catatan: Apabila perusahaan membutuhkan paket in house training, anggaran investasi pelatihan dapat menyesuaikan dengan anggaran perusahaan.
Benefit Apa Saja yang Didapatkan Peserta?
- FREE Airport pickup service (Gratis Antar jemput Hotel/Bandara)
- FREE Transportasi Peserta ke tempat pelatihan
- Module / Handout
- FREE Flashdisk
- Sertifikat
- FREE Bag or backpack (Tas Training)
- Training Kit (Dokumentasi photo, Blocknote, ATK, etc)
- 2x Coffee Break & 1 Lunch, Dinner
- FREE Souvenir Exclusive
FAQ tentang Training Internal And External Corrosion Control And Monitoring For Pipeline And Surface Facility
Q : Apa itu Training Internal And External Corrosion Control And Monitoring For Pipeline And Surface Facility?
A : Training Internal And External Corrosion Control And Monitoring For Pipeline And Surface Facility adalah pelatihan yang membahas metode pengendalian, pencegahan, serta pemantauan korosi pada sistem perpipaan (pipeline) dan fasilitas permukaan (surface facility). Program ini membantu peserta memahami mekanisme korosi internal maupun eksternal, teknik inspeksi, metode monitoring, penggunaan corrosion inhibitor, cathodic protection, serta strategi mitigasi risiko korosi untuk meningkatkan keandalan dan keselamatan aset industri
Q : Apa manfaat mengikuti Training Internal And External Corrosion Control And Monitoring For Pipeline And Surface Facility?
A : Peserta akan memperoleh pemahaman mengenai penyebab terjadinya korosi internal dan eksternal, teknik deteksi dini, metode pengukuran laju korosi, serta strategi pengendalian korosi yang efektif. Training ini membantu perusahaan mengurangi risiko kebocoran pipeline, memperpanjang umur operasi fasilitas, meningkatkan keselamatan kerja, serta mengoptimalkan biaya perawatan melalui penerapan program monitoring dan corrosion control yang tepat
Q : Materi apa saja yang dipelajari dalam Training Internal And External Corrosion Control And Monitoring For Pipeline And Surface Facility?
A : Materi pelatihan umumnya mencakup dasar-dasar korosi, jenis dan mekanisme korosi pada pipeline, internal corrosion monitoring, external corrosion control, corrosion inspection techniques, corrosion inhibitor, cathodic protection, coating system, risk assessment, failure analysis, serta penyusunan program corrosion management untuk fasilitas pipeline dan surface facility
Q : Berapa minimal running pelatihan ini ?
A : Pelatihan ini akan running idealnya minimal dengan 3 peserta, tetapi bisa disesuaikan dengan kebutuhan peserta
Q : Apakah bisa jika saya hanya ingin Training Internal And External Corrosion Control And Monitoring For Pipeline And Surface Facility sendiri aja / private course ?
A : Bisa, kami akan membantu menyelenggarakan pelatihan 1 hari jika ada persetujuan dari klien
Q : Dimana saja pelatihan biasanya di selenggarakan?
A : Pelatihan kami selenggarakan di beberapa kota besar di Indonesia seperti Bandung, Jakarta, Yogyakarta, Surabaya, Malang, Bali, Lombok dan beberapa negara seperti Singapore dan Malaysia
Q : Apakah bisa diselenggarakan selain di kota lain?
A : Penyelenggaraan pelatihan bisa diadakan di kota lain dengan minimal kuota 5 orang setiap kelas
Q : Apakah bisa juga diselenggarakan secara IHT/ In House Training di Perusahaan klien ?
A : Bisa diselenggarakan secara IHT di Perusahaan klien
Q : Apakah jadwal bisa disesuaikan dengan kebutuhan klien ?
A : Jadwal pelatihan dapat di sesuaikan dengan kebutuhan klien.
Materi, Lokasi dan Jadwal Pelatihan Bisa Berubah Sewaktu-waktu dan disesuaikan Dengan Kondisi Peserta, dimohon untuk MIGAS Konfirmasi untuk Segala Bentuk Perubahan, agar Tidak Terjadi Miskomunikasi. Segera Daftar Pelatihan, Diskon Menarik hanya Bulan Ini.
Silabus Training ini disunting oleh Suhada Faisal sebagai Content Writer Spesialis di bidang Pelatihan. Berpengalaman lebih dari 5 tahun sebagai konsultan training atau seminar baik secara online maupun offline.